Most systems require an operator confirmation to clear a crown saver alarm. Press the BYPASS button, wait for the countdown to finish and confirm the alarm has cleared. Back To all FAQS
FAQ
The A2B is a weight measuring device, so the plunger does not move. Back To all FAQS
Simply navigate to the REPORTING tab on the Rigsmart webpage. Here you will be able to generate multiple report templates and create charts over a specific time period. Back To all FAQS
Move the pipehandler to TRIP or DRILL position. Enter your permission code on the driller’s panel and navigate to COMPONENTS>CALIBRATE>ELEV POS. Press SELECT on the option that corresponds with the pipehandlers current position. Back To all FAQS
When you measure your battery voltage, measure it while it is still installed in the transmitter and they need to measure at 3.6V or above. If it is lower, then please contact Rigsmart to order a new battery. Back To all FAQS
Start with the elevators near the floor (bails floated). Slowly raise the blocks until you have reached the first layer change (cable has reached the end of the drum). Take a measurement from the bottom of the elevators down to the floor. This could be a small number. Press SELECT, highlight SETUP press SELECT, highlight …